|
|
Post by nigel on Sept 24, 2008 21:01:08 GMT
+++ Congratulations Congratulations +++Top marks for getting it through ;D as you say now just the long and laborious paper trail  Look forward to seeing it at Stoneleigh next year 
|
|
|
|
Post by jason (mitsubishi L200) on Sept 25, 2008 19:37:34 GMT
i would love the info on the points that failed , you could do a thread on here all about it or email the details to me to do if you like ,, well done, your braver than me ,,  |
|
Steve
New Member
Posts: 40
|
Post by Steve on Sept 25, 2008 22:31:27 GMT
Jason
Will put some words together and post them up.
If a mod thinks they should be a thread in their own right then I can do that.
A starter for ten.
Look at the Dakar pic in your sig......The side light and indicator are fails. You must be able to see them from 80 degrees out to the side (bull bar gets in the way) and all round to 45 degrees viewing across the front of the car (headlight gets in the way)
The fix is sidelights in the headlight unit and motorbike stork flashers drilled and tapped into the inside of the bull bar outer loop.
Steve
|
|
|
|
Post by Muddy Funkster on Sept 26, 2008 6:39:40 GMT
Well done Steve
Please let us have the update on what changes are required, can we be really cheeky and ask for some photos too?
Im really chuffed for you
Simon
|
|
Steve
New Member
Posts: 40
|
Post by Steve on Sept 26, 2008 10:13:53 GMT
Just got back.
MOT 8.30
Down to DVLA office...no queue.
Told inspection would be next week as the inspector had a lot on. I said that was a pity as I had it with me (look of reprimand from lady behind counter). Processed paperwork which prompted her needing to go ask questions. She came back and said all was OK and that they could inspect it as someone had cancelled.
All done. Will get age related plate and the paperwork should arrive in the next few days.
I will do a write up but it will take a few days if I'm to capture everything I have done to make it compliant. Not actually that difficult you just have to be very thorough with your own inspection for sharp edges etc.
Steve
|
|
Steve
New Member
Posts: 40
|
Post by Steve on Oct 8, 2008 21:13:06 GMT
Does anyone know how to post a table in a thread.
Have written a piece on SVA but laid it out as a table assuming I could just cut and paste it in.
The tags show a table but I can't work out how to use it.
Steve
|
|
|
|
Post by jason (mitsubishi L200) on Nov 6, 2008 19:37:29 GMT
can you email it to me if i pm you my email addy ??  |
|
