5hane
New Member
Posts: 9
|
Post by 5hane on Apr 6, 2009 8:36:25 GMT
hey, just join'd up so think i should post some pic's of me car *this will be very brief for the moment due to some one else's rubbish internetz* the car : ;D 14inch rs wheels, made by pirrelli, beleived to only be 14 sets made.. EVER the fun bit ;D , this is "gen 1" if you like, hopefully number 2 will have between 235-275 bhp the plan is to try keep her pritty standard looking, slammed as low as it can go, and get the xflow up and running , i plan to restor me dads 4door (well one of em ;D) and use that as a daily once i pass me test (im 16) then slowly build this one up. cheers for looking, what do we think ?? ;D
|
|
|
Post by jason (mitsubishi L200) on Apr 6, 2009 21:08:55 GMT
i would keep it exactly like it is ,, and plough all the effort into the engine ,, be safe though as you have many driving years to come ,, make it watertight, make it comfy , make it reliable ,, then it will give you many good driving hours
|
|
sam
New Member
Posts: 3
|
Post by sam on Apr 6, 2009 22:11:24 GMT
I agree. This is a super little car which will be worth more and look far better kept as it is looks wise. Uprate the engine etc, but do keep it safe too!!
Lovely car. It's great to hear your plans for it & see your pics. People like you are the future of motor talent in a lot of ways. Good for you!!
|
|
5hane
New Member
Posts: 9
|
Post by 5hane on Apr 7, 2009 9:16:37 GMT
she will be staying standard, on the outside dont worry about that ;D ive bought recently a mint interior and bits aswell, shes going to be a sleeper if plans go right and ill get my workplace to give it an exterior respray hopefully soon she will be lifted on our roll over spit and have all the underseal stripped off. the only real changes to the looks will be the 14inch wheels and it wont have the sunroof. o and 2 cibies to replace the rusty standard spotlights (not in pic's) ill try get some more pic's of progress up soon
|
|
5hane
New Member
Posts: 9
|
Post by 5hane on Apr 7, 2009 9:40:50 GMT
ok, heres some more pic's R5 turbo carb, plenum and solex intae manifold. also got a r5gtt carb rebuild kit 2L rs2000 front legs, converted to coilover just need to give them a paint up and add me new inserts (pic's later) Bias pedal box , which also needs a pint up cosworth 2wd intercooler, originally i bought a 4X4 intercooler off ebay (for £1.06 !!!!!!!!!!!!!!!!!!!!!!) but it was just too big, so now thats in me dads 3door (seen in pic, ish) and ive got his one hopeffuly im going to have it cut and rewealded 4 inches longer so it will fit round the rad and will be open to the two slots under the grill, should be quite stealthy EDIS modual and coilpacks and bits, the carb'd engine will be running megajolt ignition which seems quite straight forward to set up oil cooler the interior (excuse the doorcards ) covered in crap axel which i painted up after taking over a inch thick of underseal off it, needs a re paint really stainless bolts for the engine bay anti-tramp bars, anti dive kit and panhard rod (not in pic) waiting to go on polyush kit cibies axel pre-paint gaz rears gaz front inserts bits for rear disk conversion and what she should look like once finished any comments appreciated, cheers
|
|
|
Post by nigel on Apr 7, 2009 19:29:34 GMT
I'm Loving it 5hane It brings back so many memory's. Cant wait for spikster to see your post he's an escort nut Keep us all posted. What engine ?
|
|
|
Post by spikester18 on Apr 9, 2009 18:36:24 GMT
come on nige! u think i dont already know this guy! lol hows it going shane! welcome to the site matey! i must say jelousy is sweating out of me, how the hell did u manage to be so god dam lucky! my essy is no ware near as speced up as yours and i bn doing mine for years! ace cafe was exelent except the trottle busness lol i think the burn out i did sealed its fate! rite so far 'nigel' who just posted is building a sonic 7, check out his progress in my kit car section, it is truly exelent, and as a good mate will always do will let me have a go..... sam up the top of the post has a lovly xr2 that she wont sell to me! and jason somtimes gos by the name of tracey (il tell ya later) has an animal of a V8 dakar, hes got a progress in my kit car too, there will be no dout there will be more saying hi, any ways i think ur work place are gona take care of me door now, gona bring the car up for a quote........if any1 is wondering y the escort had a crash
|
|
minime
Junior Member
Posts: 76
|
Post by minime on Apr 10, 2009 20:52:30 GMT
NICE CAR M8 ITS GOOD TO SEE MORE OLD SCHOOL FORDS ON THIS SITE ITS ABOUT TIME ? !
|
|
5hane
New Member
Posts: 9
|
Post by 5hane on Apr 14, 2009 13:30:44 GMT
cheers people hey mike, ive got to upload some pic's of the weekends progress thanks for the repies
|
|
|
Post by spikester18 on Jun 8, 2009 18:00:36 GMT
hi matey got ya link but it dont wana work
|
|
|
Post by jason (mitsubishi L200) on Jun 8, 2009 19:31:01 GMT
come on ,,, more pics
|
|
5hane
New Member
Posts: 9
|
Post by 5hane on Jul 2, 2009 22:18:24 GMT
sorry for the late reply, heres a update for you all shes been put on a roll over jig to remove the underseal and do the wealding heres the unerside, not tooo bad - but there is a few bits that need attention. Just due to no work - i have no job so now everythings taking aggeesss now the wings, doors, boot etc are all off and ive started removing thew underseal ! lovely job
|
|
5hane
New Member
Posts: 9
|
Post by 5hane on Jul 2, 2009 22:20:11 GMT
ok, ive now started taking underseal off. heres a slide show of pic's of rust etc... (better than going though 30 odd pic's i though) (click on pic) so thats whats been happening ;D the wealding shouldnt bee to far away now ;D and i have got all the pannels to fix her up so im just waiting for the wealder man to come round ;D
|
|
5hane
New Member
Posts: 9
|
Post by 5hane on Jul 2, 2009 22:21:54 GMT
|
|
|
Post by spikester18 on Feb 1, 2010 18:59:45 GMT
saw the throttle boddies for this harrier the other day, this motor is gona sound sweet
|
|